Our stainless welded pipe rolling former machine can produce many types of welded pipes,such as H32 H50 H76 H127.
Take H50 stainless welded pipe rolling former machine for example
The stainless welded pipe rolling former machine is intended for manufacturing of round pipe of Φ16mm-Φ50mmwith thickness of 0.5mm–2.5mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
Finished product will be of round, square or rectangular pipe.
What is the Features of stainless welded pipe rolling former machine?
1.It supports many kinds of material like carbon steel, GI and others.
2.One stainless welded pipe rolling former machine could make a large range of pipe sizes by changing mold.
3.One machine could be used to make square pipe, round pipe by changing mold.
4.The pipe made by this kind of stainless welded pipe rolling former machine could be used in many areas like water tube, wire pipe and others
What is the working flow of sstainless welded pipe rolling former machine
SteelTape→→ Double-head uncoiler →→Strip-head Cutter and welder→→Spiral accumulator→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ Removing External and internal burr→→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table
What is the specifications of stainless welded pipe rolling former machine?
| name |
top selling products in alibaba galvanized steel stainless welded pipe rolling former machine |
| a) Steel Pipe Specification | |
| Pipe diameter: | Ø16–Ø50mm |
| Pipe Thickness: | 0.5– 2.5mm |
| Square Pipe: | 14X14mm –40X40mm |
| Rectangle Pipe: | 10X20mm –40X50mm |
| Pipe Thickness: | 0.5–2.0mm |
| Pipe Length: | 6-9m |
| Length Tolerance: | 0-3mm |
| b) SteelTape Specification | |
| Material: | Low Carbon steel (δb≤500Mpa, δs≤235Mpa) |
| Steel Tape: | |
| Inner diameter: | Φ580-Φ610mm |
| Outer diameter: | Φ900-1500mm |
| Strip steel width: | 60mm-200mm |
| Strip steel thickness | 0.5mm-2.5mm |
| The maximum weight: | 3.0 tons |
| c) Electricity | |
| Dynamic power: | AC380V±10%, 3phases, 50Hz±10% |
| Control Power: | AC220V±10%, one phase, 50Hz ±10% |
| Electric installed capacity: | appro 450KW |
| e) Cooling water | |
| Reservoir for High Frequency equipment: | 15 m³, one set |
| Reservoir for circulating cooling water: | 15 m³, one set |
| f) Compressed air | |
| Pressure: | 0.4Mpa |
| Flow: | 0.5m3/h |
| g)Line speed: | 30-90m/min |
more details of sstainless welded pipe rolling former machine
two kinds of Shearing & butt welding machine
three types of spiral accumulator
two kinds of runout tables
Next： Fillet welded pipe roll forming machine ,aluminum pipe making machine
