In general, the development of high-frequency welded pipe units must comply with the safe operating procedures, the operator must not be in contact with the mold during the operation of the unit, but also pay attention to the handle in the direction of the outlet, to avoid improper operation for their health and safety. Make an impact.
In addition, the operator of the high-frequency welded pipe unit should pay attention to check whether the lubrication points of the unit are lubricated before operation.
Otherwise, it is necessary to add some lubricating oil to ensure the normal operation and work of the unit. During the use of high-frequency welded pipe units, some high-temperature resistant synthetic aluminum-based greases should be used to avoid damage to the high-frequency welded pipe unit.
Frequently asked questions
What causes most of the damage to a high frequency welded pipe unit?
Two causes account for most of it: operating the unit against its safe procedure, and running it with dry lubrication points. Every other point below follows from those two.
Why must the tooling not be touched while the unit is running?
Because the mould and the tube are moving at production speed. The operator must not come into contact with the mould during operation, and hands must also be kept clear of the outlet direction, so that nobody is in the path of the tube leaving the line.
What should be checked before starting the unit?
The lubrication points. They have to be checked before operation, and if any of them is dry, oil has to be added before the unit is started.
Which lubricant should be used?
A high temperature resistant synthetic aluminium based grease. The welding section runs hot, and an ordinary grease does not survive there.
Does following the procedure also protect the operator?
Yes. The safe operating procedure covers both: it is what keeps the unit from being damaged and what keeps the operator out of the way of the moving mould and the outgoing tube.
Where to go next
Related pages: welded pipe mould rollers, high frequency welding machine operation guide and advantages of high frequency welded pipe equipment.
