The ZT-50 stainless covers pipe ID from 20mm-76mm, in wall thickness from 0.3mm-1.2mm, at line speeds of 3-7m/min. Every line is built to order around the section, wall thickness and output the customer actually runs, so the roll tooling and forming section are set for that product rather than taken from a fixed catalogue.
Serial No | Name of products | Quality |
|---|---|---|
1 | Single-head uncoiler | 1 |
2 | Clean slot | 1 |
3 | Strip Steel Guide | 1 |
4 | Argon Arc Welder | 1 |
5 | Weld Joint Polishing | 2 |
6 | Horizontal roller | 11 |
7 | Cutting Saw | 1 |
8 | Run out table | 1 |
9 | Vertical roller | 13 |
10 | Wheel gear box | 6 |
11 | Main driving spindle | 1 |
Capacity:
Item | Value |
|---|---|
Pipe ID | 20mm-76mm |
Thickness | 0.3mm-1.2mm |
Speed | 3-7m/min |
Stainless tube is welded with an argon arc welder rather than at high frequency, which suits the thinner wall range and keeps the weld zone clean. The line runs a single-head uncoiler, a clean slot with a strip steel guide, the welding station with weld-joint polishing, a horizontal roller train, and a cutting saw.
Drawing of ZT-50 stainless steel unit
